- Outer dims: 60.25" (H) x 27.75" (W) x 27.75" (D)
- Inner dims: 58.75" (H) x 22.25" (W) x 26" (D)
- Weight: 2116lbs
- Security rating: TL-30
- Fire rating: None
- Lock: Electronic Lock
-
Out of stock
-
Out of stock
Built in USA - Can be shipped anywhere or installed by Boswell Safe and Vault on the West Coast.
- Face dimensions: 56.25" x 86"
- Clear opening: 36" x 78"
- Minimum rough opening needed: 49" x 84"
-
Built in USA - Good lightweight design for commercial or residential applications - Can be shipped anywhere or installed by Boswell Safe and Vault on the West Coast
- Weight: 1800lbs
- Face dimensions: 40.5″ x 80.25″
- Clear opening: 36″ x 79″
- Minimum rough opening needed: 39.5″ x 81″
-
Out of stock
Available with factory tan paint or new grey paint job inside and out. Paint adds $200.
- Outer dims: 56 “(H) x 41.50 “(W) x 34 “(D)
- Inner dims: 42 “(H) x 39 “(W) x 28.50 “(D)
- Weight: 3100lbs
- Security rating: TL-30
- Fire rating: None
- Lock: Group 2 Dial Lock (Electronic Lock is available for $250 additional)
-
Out of stock
- Outer dims: 67 “(H) x 41 “(W) x 34 “(D)
- Inner dims: 53 “(H) x 38.5 “(W) x 28 “(D)
- Weight: 3596lbs
- Security rating: TL-30
- Fire rating: None
- Lock: Group 2M Dial Lock (Electronic Lock is available for $250 additional)
-
Used plate body construction TL-30 safes are the most affordable way to get a TL-30 level of protection. Plate steel TL-30 safes offer the same level of protection as composite TL-30 safes but at a lower cost. When you need to satisfy an insurance company's requirement for TL-30 protection, a used plate body safe is a great solution without breaking the bank.
- Outer dims: 67.25“(H) x 41“(W) x 34“(D)
- Inner dims: 53“(H) x 38.50“(W) x 25“(D)
- Weight: 3668lbs
- Security rating: TL-30
- Fire rating: None
- Lock: Electronic Lock
-
Used plate body construction TL-30 safes are the most affordable way to get a TL-30 level of protection. Plate steel TL-30 safes offer the same level of protection as composite TL-30 safes but at a lower cost. When you need to satisfy an insurance company's requirement for TL-30 protection, a used plate body safe is a great solution without breaking the bank.
- Outer dims: 56.25“(H) x 41“(W) x 34“(D)
- Inner dims: 42“(H) x 39.25 “(W) x 28.50“(D)
- Weight: 3096lbs
- Security rating: TL-30
- Fire rating: None
- Lock: Mechanical lock
-
This safe has been refurbished and sports a new factory-quality paint job as well as a new lock. Used plate body construction TL-30 safes are the most affordable way to get a TL-30 level of protection. Plate steel TL-30 safes offer the same level of protection as composite TL-30 safes but at a lower cost. When you need to satisfy an insurance company's requirement for TL-30 protection, a used plate body safe is a great solution without breaking the bank.
- Outer dims: 56.25 “(H) x 41.25 “(W) x 34 “(D)
- Inner dims: 42 “(H) x 38 “(W) x 24.50 “(D)
- Weight: 3124lbs
- Security rating: TL-30
- Fire rating: None
- Lock: Mechanical lock
-
Out of stock
- Outer dims: 80.25“(H) x 42.25“(W) x 34“(D)
- Inner dims: 78“(H) x 40.25“(W) x 28.25“(D)
- Weight: 4906lbs
- Security rating: TL-30
- Fire rating: None
- Lock: Electronic Lock
-
Out of stock
This safe is new (old stock).
- Outer dims: 30 1/4“(H) x 20 1/4“(W) x 22“(D)
- Inner dims: 27“(H) x 17 “(W) x 16 1/4“(D)
- Weight: 280lbs
- Security rating: None
- Fire rating: 1 hour at 1700 degrees
- Lock: Electronic Lock
-
This C-Rate plate body safe is a great, affordable way to get a safe with a lot of steel if you're primarily concerned about security.
- OD: 36"H x 24"W x 21.5"D
- ID: 35"H x 23"W x 16.25"D
- Weight: 1,470lbs
- Lock: La Gard Dial Lock
-
Out of stock
These Sun Welding safes are made in the USA! This one has a half gun and half shelf interior.
- Outer dims: 60"(H) x 30"(W) x 20"(D)
- Weight: 500lbs
- Fire rating: 30 minutes
- Lock: Sargent and Greenleaf Group 2 Combination Dial
