- Outer dims: 72″ (H) x 50″ (W) x 32″ (D)
- Weight: 1750lbs
- Security rating: None
- Fire rated
- Lock: Electronic
-
Out of stock
Extra large custom made gun safe with fire lining that can hold up to 36 rifles plus shelves. The door frame is reinforced with bolt "pockets" where the bolts slide into to prevent prying. -
Out of stock
Well built safe made in Los Angeles, Ca. 10 gauge door and body steel thickness. 20 total locking bolts Currently able to store 6 long guns with lots of shelving, can make a custom gun rack that can hold up to 24 long guns on the right side.- Outer dims: 60“(H) x 40“(W) x 25“(D)
- Weight: 960lbs
- Gun Capacity: 6 long guns
- Security rating: UL RSC Burglary Rating
- Fire rating: 60-minute fire rating at 1800 degrees
- Lock: Electronic Lock
-
Out of stock
This safe is new (old stock).
- Outer dims: 16"(H) x 20"(W) x 20 3/4"(D)
- Inner dims: 10 1/4"(H) x 14"(W) x 13 3/4"(D)
- Weight: 650lbs
- Security rating: TL-15
- Fire rating: None
- Lock: Electronic
-
Sale!Out of stock
- 2 Hour Fire Resistant Factory Tested
- EMP Resistant Spartan or Titan D-Drive Electronic Lock
- Glass re-locker
- Hard plate cage through out entire body and door.
- Bolt down hole (5/8″ Inside Diameter)
- Highly Compressed Proprietary Concrete Mixture
- Ext. Dims: 33 1/2″ H x 24″ W x 22 1/2″ D
- Int. Dims: 28″ H x 18 1/2″ W x 14 1/2″ D
- Cubes: 4.3
- Weight: 1,060 lbs
-
Sale!
- 2 Hour Fire Resistant Factory Tested
- Special Design Burglary Resistant Handle
- EMP Resistant Type 1 S&G Spartan D-Drive Electronic Lock
- Glass re-locker
- Hard plate
- Bolt down hole (5/8″ Inside Diameter)
- Highly Compressed Proprietary Concrete Mixture
- Ext. Dims: 16” H x 19 1/2” W x 19” D
- Int. Dims: 10 1/2″ H x 14″ W x 11″ D
- Cubes: 0.9
- Weight: 450 lbs
-
Sale!Out of stock
- 2 Hour Fire Resistant Factory Tested
- Special Design Burglary Resistant Handle
- EMP Resistant Type 1 Electronic Lock
- Glass re-locker
- Hard plate
- Bolt down hole (5/8″ Inside Diameter)
- Highly Compressed Proprietary Concrete Mixture
- Ext. Dims: 31.5" H x 23.5" W x 22.5" D (Add 3” to Depth for Hinges/Handle)
- Int. Dims: 26” H x 18” W x 13.75” D
- Weight: 1,114 lbs.
- UL Security Rating: TL-30
-
Sale!
- 2 Hour Fire Resistant Factory Tested
- Special Design Burglary Resistant Handle
- EMP Resistant Type 1 Electronic Lock
- Glass re-locker
- Hard plate
- Bolt down hole (5/8″ Inside Diameter)
- Highly Compressed Proprietary Concrete Mixture
- Ext. Dims: 23.5" H x 19.5" W x 19.5" D (Add 3” to Depth for Hinges/Handle)
- Int. Dims: 18” H x 14.25” W x 11.5” D
- Cubes: 1.6 interior cu ft
- Weight: 657 lbs.
- UL Security Rating: TL-30
-
- B Rated Floor Safe for Foundations
- 1/2" Thick Solid Steel Door
- Spring loaded relocking device
- Full length dead bar
- Powder Coated for more durable protectino
- UL Listed S&G Group 2 dial with external relocker to protect against burglary attempts
- Air-spring bar enable the door can be opened easily
- Drill resistant hardplate to protect lock
- Exterior Dimensions: 14-1/2"(H) (16-1/2" at it's highest point) x 35"(L) x 12-1/2"(W)
- Weight: 135lbs
-
- B Rated Floor Safe for Foundations
- 1/2" Thick Solid Steel Door
- Spring loaded relocking device
- Full length dead bar
- Powder Coated for more durable protection
- UL Listed S&G Group 2 dial with external relocker to protect against burglary attempts
- (5) Solid Steel Locking Bolts
- Air-springg bar enable the door can be opened easily
- Drill resistant hardplate to protect lock
- Exterior Dimensions: 18"(H) x 13-1/2"(W) x 23-1/2"(D)
- Interior Dimensions: 16-1/2"(H) x 13"(W) x 23"(D)
- Weight: 140lbs
-
- B Rated Floor Safe for Foundations
- 1/2" Thick Solid Steel Door
- Spring loaded relocking device
- Full length dead bar
- Powder coated for more durable protection
- UL Listed Group 2 lock with external relocker to protect against burglary attempts
- (5) Solid Steel Locking Bolts
- Air-spring bar enable the door can be opened easily
- Drill resistant hardplate to protect lock
- Exterior Dimensions: 14-9/10"(H) x 13-1/2"(W) x 17-1/2"(D)
- Interior Dimensions: 12-9/10"(H) x 10-9/10"(W) x 11-3/10"(D)
- Weight: 93lbs
-
- B Rated Floor Safe for Foundations
- 1/2" Thick Solid Steel Door
- Spring loaded relocking device
- Full length dead bar
- Powder Coated for more durable protection
- UL Listed S&G Group 2 lock with external relocker to protect against burglary attempts
- (5) Solid Steel Locking Bolts
- Air-spirng bar enable the door can be opened easily
- Drill resistant hardplate to protect lock
- Exterior Dimensions: 14-9/10"(H) x 13-1/2"(W) x 11-4/5"(D)
- Interior Dimensions: 12-9/10"(H) x 10-9/10"(W) x 6-9/10"(D)
- Weight: 79lbs
-
Sale!Out of stock
With a TRTL-30 rating, this Hamilton safe is rated to fend off sophisticated attacks using both professional level tools and torches. Considering what a similarly rated new safe costs (upwards of $15,000), used safes of this caliber are uncommon and rarely change hands. This safe has been fully refurbished by us so you can have all of the function and lifespan of a brand new safe at a fraction of the cost.
- Outer dims: 71" (H) x 42.5" (W) x 36" (D)
- Inner dims: 64" (H) x 34.50" (W) x 19" (D)
- Weight: 4,926lb
- Security rating: TRTL-30
- Fire rating: 2 Hour Fire Rating
- Lock: Dial Lock
-
Out of stock
Get 2 safes for the price of one. With this unique setup you can have a his and hers safe or you can organize inventory and limit who can access specific safes. The safe has new Group 2M dial locks installed on each door.
- Outer dims: 59.25 “(H) x 73.50 “(W) x 32.25 “(D)
- Inner dims: 57.50 “(H) x 35.75 “(W) x 27.75 “(D)
- Weight: 3450lbs
- Security rating: TL-15
- Fire rating: None
- Lock: Lagard Group 2M dial locks
-
Out of stock
- Outer dims: 49.50 “(H) x 37.50 “(W) x 25 “(D)
- Inner dims: 48.75 “(H) x 36 “(W) x 22.50 “(D)
- Weight: 2700lbs
- Security rating: TL-30
- Fire rating: None
- Lock: Dial
-
Sale!Out of stock
Used plate body construction TL-30 safes are the most affordable way to get a TL-30 level of protection. Plate steel TL-30 safes offer the same level of protection as composite TL-30 safes but at a lower cost. When you need to satisfy an insurance company's requirement for TL-30 protection, a used plate body safe is a great solution without breaking the bank.
- Outer dims: 66"(H) x 38.25"(W) x 33.25"(D)
- Inner dims: 63"(H) x 35.50"(W) x 24.25"(D)
- Weight: 3596lb
- Security rating: TL-30
- Fire rating: None
- Lock: Mechanical
-
This Hamilton safe has been fully refurbished with a factory-quality paintjob and a new S&G Electronic Lock. Used plate body construction TL-15 safes are the single most affordable way to get a tool rated level of protection. Plate steel TL-15 safes offer the same level of protection as composite TL-15 safes but at a lower cost. When you need to satisfy an insurance company's requirement for TL-15 protection, a used plate body safe is a great solution without breaking the bank. With our refurbished TL safes, you can get all of the function and lifespan of a brand new safe at a fraction of the cost.
- OD: 32"H x 33"W x 32"D
- ID: 30"H x 30.25"W x 27.50"D
- Weight: 1,648 LB
- Security rating: TL-15
- Fire rating: None
- Lock: S&G Electronic
-
Sale!
This Hamilton TL-15 safe has been outfitted with a new mechanical lock and sports a new paintjob as well as an adjustable wood shelved interior. If you want to reconfigure the interior to your liking, the shelves are adjustable or removable. Used plate body construction TL-15 safes are the single most affordable way to get a tool rated level of protection. Plate steel TL-15 safes offer the same level of protection as composite TL-15 safes but at a lower cost. When you need to satisfy an insurance company's requirement for TL-15 protection, a used plate body safe is a great solution without breaking the bank.
- Outer dims: 46"(H) x 38"(W) x 32"(D)
- Inner dims: 45"(H) x 37"(W) x 25.5"(D)
- Weight: 1,880lb
- Security rating: TL-15
- Fire rating: None
- Lock: Mechanical Dial
-
Out of stock
This Hamilton TL-15 safe has been refurbished with a factory quality industrial paint job and is outfitted with an adjustable shelf interior. Used plate body construction TL-15 safes are the single most affordable way to get a tool rated level of protection. Our refurbished TL safes are very popular with residential customers who are looking for good quality safe at a higher security rating than a typical residential safe. Plate steel TL-15 safes offer the same level of protection as composite TL-15 safes but at a lower cost. When your business needs to satisfy an insurance company's requirement for TL-15 protection, a used plate body safe is a great solution without breaking the bank.
- Outer dims: 72“(H) x 40.5“(W) x 32“(D)
- Inner dims: 70.5"(H) x 38"(W) x 24"(D)
- Weight: 2,787 lbs
- Security rating: TL-15
- Fire rating: None
- Exterior Lock: Mechanical Dial
- Hinge: Right Swing
-
This Hamilton safe is outfitted with (6) inner lockers, each with its own lock. All locks have been reset to factory settings and are ready to be programmed. Used plate body construction TL-15 safes are the single most affordable way to get a tool rated level of protection. Plate steel TL-15 safes offer the same level of protection as composite TL-15 safes but at a lower cost. When you need to satisfy an insurance company's requirement for TL-15 protection, a used plate body safe is a great solution without breaking the bank.
- Outer dims: 71.25“(H) x 40.25“(W) x 31.75“(D)
- Inner Locker Dimensions: (2) 10"H x 16"W x 22"D, (2) 22"H x 16"W x 22"D, (2) 37"H x 16"W x 22"D
- Weight: 3,375 lbs
- Security rating: TL-15
- Fire rating: None
- Exterior Lock: LaGard Electronic Lock
- Interior Locks: (6) LaGard Electronic Locks
-
This Hamilton safe is outfitted with (20) inner lockers, each with its own lock. All locks have been reset to factory settings and are ready to be programmed. Used plate body construction TL-15 safes are the single most affordable way to get a tool rated level of protection. Plate steel TL-15 safes offer the same level of protection as composite TL-15 safes but at a lower cost. When you need to satisfy an insurance company's requirement for TL-15 protection, a used plate body safe is a great solution without breaking the bank.
- Outer dims: 71.25“(H) x 40.25“(W) x 31.75“(D)
- Inner Locker Dimensions: (16) 5"H x 16"W x 22"D, (4) 10"H x 16"W x 22"D
- Weight: 4,125 lbs
- Security rating: TL-15
- Fire rating: None
- Exterior Lock: S&G Electronic Lock
- Interior Locks: (10) LaGard Electronic Locks and (10) S&G Electronic Locks
-
Out of stock
- Outer dims: 52.25 “(H) x 37.25 “(W) x 26 “(D)
- Inner dims: 50 “(H) x 35.75 “(W) x 20.75 “(D)
- Weight: 2250lbs
- Security rating: TL-15
- Fire rating: None
- Lock: Dial
-
Out of stock
- Outer dims: 74“(H) x 45“(W) x 34“(D)
- Inner dims: 67“(H) x 27 1/2“(W) x 18“(D)
- Weight: 4148lbs
- Security rating: TL-30
- Fire rating: 1 Hour Fire Rating
- Lock: Dial Lock
-
Out of stock
- Outer dims: 28"(H) x 30"(W) x 26"(D)
- Inner dims: 24"(H) x 26"(W) x 19"(D)
- Weight: 1080lbs
- Security rating: TL-15
- Fire rating: Fire protection 2 hours at 1850 degrees
- Lock: Dial
-
Out of stock
- Outer dims: 72 “(H) x 41 “(W) x 34.5 “(D)
- Inner dims: 66 “(H) x 33 “(W) x 25 “(D)
- Weight: 3532lbs
- Security rating: TL-15
- Fire rating: 1 Hours at 1850 degrees
- Lock: Group 1 Electronic Lock
-
Out of stock
Composite construction TL-15 safes offer all of the security we've come to expect from a TL-15 with the added benefit of a 1 hour fire rating. With one of our nicer used composite TL-15 safes, you get all of the benefits of a new safe but at a fraction of the cost and with much quicker availability. **This safe comes standard with a SHELVED INTERIOR, the last picture displays an OPTIONAL gun interior that we can make and retrofit for $550. **
- Outer dims: 72"(H) x 41"(W) x 32"(D)
- Inner dims: 66.5"(H) x 34"(W) x 25"(D)
- Weight: 3,250lb
- Security rating: TL-15
- Fire rating: 1 Hour
- Lock: Mechanical
- Hinge: Left Hinge
-
Out of stock
Composite construction TL-15 safes offer all of the security we've come to expect from a TL-15 with the added benefit of a 1 hour fire rating. With one of our nicer used composite TL-15 safes, you get all of the benefits of a new safe but at a fraction of the cost and with much quicker availability. This safe also comes with a flexible gun interior. Gun safes of this caliber are not common and typically come with a very significant price tag.
- Outer dims: 72"(H) x 41"(W) x 32"(D)
- Inner dims: 66.5"(H) x 34"(W) x 25"(D)
- Weight: 3250lb
- Security rating: TL-15
- Fire rating: 1 Hour
- Lock: Mechanical
- Hinge: Right Hinge
-
Out of stock
- Outer dims: 74 “(H) x 39.50 “(W) x 34.25 “(D)
- Inner dims: 68.50 “(H) x 34 “(W) x 27.50 “(D)
- Weight: 3500lbs
- Security rating: Tl-15
- Fire rating: UL 2 hours at 1850 degrees
- Lock: S&G Group 2M dial
-
Out of stock
This is a Hamilton Class I Modular bank vault that came out of a closing bank branch. The vault was professionally removed by our crew with the intention of reinstalling at a different location. We have all necessary parts/pieces needed to reassemble in your location. Everything was verified to be in good working order before disassembly and the door has remained packaged up and stored indoors. This includes the full vault with all necessary panels, door frame, and vault door. This is a Class 1 Bank Vault, which is equivalent to a TL-30 rated safe. We offer full vault installation services and can install anywhere in CA, AZ, or NV. Price does not include freight or installation. For installation we need good forklift access to the space with at least 1 foot of open space above the vault to maneuver the ceiling panels into place.
- Vault Dimensions (OD): 10' 4" H x 9' 6" W x 14' 10" D (Overall height is including A/C riser, actual outside wall height is 9'6")
- Vault Dimensions (ID): 9' 1" H x 8' 8" W x 14' D
- Security Rating: Class I (TL-30 Equivalent)
- ***The assembled pictures are of a vault of the same make, model, and specs with extremely similar dimensions to show what it will look like after final assembly. The vault layout is depicted in the last picture which is the diagram for the vault you'll receive.
- ***This vault has a left swing door, the door pictured in the gallery is the actual door you'll receive. It is in excellent condition but please keep in mind this is a used vault from a functioning bank and cosmetic blemishes may still exist.
-
Out of stock
This is a Hamilton Class I Modular bank vault that came out of a closing bank branch. The vault was professionally removed by our crew with the intention of reinstalling at a different location. We took detailed photos and have all necessary parts/pieces needed to reassemble in your location. Everything was verified to be in good working order before disassembly and the door has remained packaged up and stored indoors. This includes the full vault with all necessary panels, door frame, and vault door as well as all materials needed to install. This is a Class 1 Bank Vault, which is equivalent to a TL-30 rated safe. We offer full vault installation services and can install anywhere in CA, AZ, or NV. Price does not include freight or installation. For installation we need good forklift access to the space with at least 1 foot of open space above the vault to maneuver the ceiling panels into place.
- Vault Dimensions (OD): 10' 2 1/2" H x 10' 10 1/2" W x 15' 11 1/4" D (Overall height is including A/C riser, actual outside wall height is 9'5.5")
- Vault Dimensions (ID): 9' 1/2" H x 10' 1/2"W x 15' 1 1/4" D
- Security Rating: Class I (TL-30 Equivalent)
-
Out of stock
Class 1 door, which is equivalent to a TL-30 rating. Door can be installed in a modular vault provided by Boswell or we can install the door in an existing opening. Professional installation by our in-house staff is available anywhere on the west coast. Or the vault door can be shipped nationwide.
